Formulated to remove rust stains
from concrete & masonry surfaces.

Lifeguard Rust & Stain Remover is a heavy duty cleaner formulated to breakdown imbedded rust and atmospheric staining from architectural concrete and masonry.  Lifeguard Rust & Stain Remover will also brighten most concrete and aggregate surfaces.

Benefits:

Safe to use
Environmentally Friendly
Fast Acting
Water Rinseable

Application Guidelines:

     1.  Pre-wet the surface with water before applying
          Lifeguard Rust & Stain Remover.

    2.  TEST A SMALL AREA to determine cleaning
          results.

    3.  Apply Lifeguard Rust & Stain Remover
       with a low-pressure plastic sprayer, brush or roller.

    4.  Allow Lifeguard Rust & Stain Remover to
         remain on the surface for 5-7 minutes.

    5.  Use a stiff bristle nylon brush or broom to remove
         severe stains.

    6.  Rinse surface thoroughly with hose or power
         washer.

    7.  Can be diluted with up to 5 parts of water.

    8.  DO NOT ALLOW CLEANER TO DRY ON THE
         SURFACE.

    Important:
      May damage acid-sensitive and polished masonry
      surfaces.

Limitations:

• Do not mix with bleach or other cleaners.
• Do not use on metal.  Use caution near colored concrete or grout.
• Multiple cleanings may be necessary for severe oil build-up.
• Do not use in temperatures below 32° F.
• Not effective as a paint stripper.
• May etch natural stone, marble and sandstone.