APPLICATION GUIDELINES:
- TEST A SMALL AREA to determine cleaning results.
- Apply with a low-pressure plastic sprayer, brush or roller.
- Allow Lifeguard Concrete & Masonry Cleaner to remain on the surface for 10-12 minutes.
- Use a stiff bristle nylon brush or broom to remove severe stains.
- Rinse surface thoroughly with power washer.
- Can be diluted with up to 5 parts of water.
- DO NOT ALLOW CLEANER TO DRY ON THE SURFACE.
LIMITATIONS:
- Multiple cleanings may be necessary for severe oil build-up.
COVERAGE:
- Porous Surface: 250 - 500 sq. ft./gal
- Dense Surface: 500 - 1000 sq. ft./gal
IMPORTANT: Read product container before starting project.