APPLICATION TOOLS:
- Garden Sprayer
- Brush (nylon or polyester)
- Paint Pad
- Roller (3/8" or 3/4" nap)
LIMITATIONS:
- Do not apply to previously painted, stained or sealed surfaces.
- Avoid applying on dirty or wet surfaces.
- Do not apply Lifeguard to any hot surfaces or if precipitation is expected within a 24 hour period. Avoid hot weather conditions, when possible, limit application to shaded conditions during hot weather months.
- New concrete, stucco or grout must dry 28 days before application of Lifeguard Multi-Surface Sealer.
- May not be effective on some types of limestone, marble or slate. ALWAYS TEST NATURAL STONE TO ENSURE DESIRED RESULTS.
- Lifeguard should not be used where hydrostatic pressure is present, i.e. fish ponds, bird baths, retaining walls and basements.
DRYING TIME:
- Will dry to the touch and can be walked on in 6 hours.
- It takes 24 hours to set up an initial water barrier.
- Must be allowed to dry for at least 48 hours before it is exposed to heavy objects or large amounts of water for long periods of time (i.e. severe rain storm).
CLEAN UP:
- Clean all tools with soap and water
- If excess product appears on the surface 5 minutes after application, use damp cloth and gently rub to remove. Repeat as needed.
IMPORTANT: Read product container before starting project.